If your hardwood floorings have lost their luster, began to obtain surface scuffs and also scratches, or simply need some cleaning and also beautifying after that sandless resurfacing might be simply what you need. This procedure helps all kinds of hardwood floorings including; solid incomplete (floorings that were completed on website), solid pre finished (floors that were acquired already completed in a factory), as well as engineered wood floorings. Depending on the sort of timber flooring you have this process can vary a bit.

I will cover the needed steps for every sort of flooring.

* Bona brand name “Preparation” or Standard Coatings brand name “Tycote” (these are engraving remedies that help make certain a new coating will bond to your floors – note: just needed for pre finished strong or pre completed engineered floorings).

* A wood floor coating that works with the etch item; if you are getting the Bona item I would certainly suggest Bona Web traffic HD coating or Bona Woodline coating, or if you get the Fundamental Coatings Tycote, I would certainly recommend their Road Shoe End Up.

* Floor Buffer – You can rent a flooring buffer at nearly any type of tool rental shop and also at some residence enhancement shops. If you have actually never ever ran a basic buffer you might consider obtaining a square buffer as these vibrate rather than oscillate.

* Vacuum cleaner – I suggest one with a soft bristle or soft really felt brush.

* MicroFiber Dirt Sponge.

* Applicator – I recommend an 18″ t-bar style application made by Duratool. Lambswool applications, as well as smaller sized nap paint rollers can likewise benefit this.

* Brush – I favor the foam design 3-4″ large brushes.

* Barrier Pad – White Pads (1-2) likewise readily available at device rental store (extra red or maroon pad if you have pre ended up engineered or pre finished solid floors).

* Fining sand Display 150 or 220 grit – These are also discovered at device rental stores or online. An alternative to these are Norton brand name sand bucks buffer pads.

Preparation

The initial thing you’ll want to do is prep the space you are doing. You’ll intend to eliminate all furniture as well as any other items that get on the floorings you are doing. It’s additionally a good idea to utilize some painters tape to tape off the baseboards, and also to tape off adjoining surfaces/floors that you want to shield.

You may likewise want to hang up some plastic movie in entrances to aid contain the dust produced. You’ll additionally wish to clean the floors and make certain that there are no pieces of debris as these points could get caught under the buffer as well as damage the floors. Check out this link to learn more info about floor installation.

Rubbing

After prepping the room currently it’s time to rub the floors. Take the white barrier pad as well as place in on the bottom of the buffers drive head. After that place the fining sand display under the white pad (the display is what you wish to be touching the flooring). Currently start the barrier and moving in a to and fro movement enthusiast over the floors trying to opt for the grain of the wood. Attempt to cover fully of the floorings quite possibly.

After buffing the floors now you wish to take a made use of piece of the sanding screen and gently hand sand in locations of the flooring that the barrier wouldn’t reach such as edges, under closets, under radiators etc. This is simply to additionally etch the surface area of these locations too.

The next step will certainly differ a bit based upon the kind of flooring you have.

If you have pre finished flooring, the next point you wish to do is to rub the floors again. This time around you want to use just the red or maroon barrier pad. Currently what you’re going to do is a wet or moist buffing. You want to haze several of the Bona Prep of Basic Coatings Tycote onto the flooring making use of a spray container.

This step is to etch the surface of the floors as well as to make certain that a brand-new finishing will certainly bond to the finish that gets on the factory finished floor item. You’ll want to do this quite possibly to ensure you get every inch of the floors and that fully has an etched or plain sort of look to it. You’ll even intend to take a piece of the buffer pad and also enter into the corners and also various other difficult situations that the barrier would not reach.

( note: you can utilize this action on wood floorings that were website completed too, specifically if you have any kind of doubts concerning a brand-new coating adhering to the existing surface you have or if you have actually used any kind of wax based cleansers or revitalizing products that are wax based as they can prevent brand-new coverings from sticking to the floorings).

Cleaning up

After you complete the buffing component of the project, now you wish to cleanse the floorings very well. You’ll wish to vacuum the floorings really well and then dirt mop them truly well.

Finish

When you have cleaned up the floorings, now you’re ready to apply the layer( s). Adhere to the makes directions for the amount of square feet of protection per gallon. Apply the completed with the grain using whatever kind of application you got. Make certain to work in sections.

Allow Dry

After you have applied the finishing currently you’ll simply intend to wait the suppliers advised completely dry time before walking on the floors. You can discover this on the finish container. You’ll desire to wait the makers recommended time for treating before placing furnishings back into area.

Repeat if Wanted

If you would certainly like you can also rub the flooring once again as well as apply a second, or third layer for added security. I suggest rubbing after each finishing with a 220 grit fining sand display and complying with all other instructions besides making use of the etching products as they will not be required when one finish is used.

Share Button