Almost everyone has had to struggle with it: mould infestation in their own home. Living rooms such as the kitchen, bedroom or living room are also affected, as are the bathroom, attic or cellar. There are no rooms where mould cannot appear. But why does mould develop at all and why is it so difficult to get rid of it?

Too much moisture causes mould to develop

Mould is caused by too much moisture in the wrong places. The causes of moisture can have many causes, which also influence the type of mould infestation. Also refer to the advice on how to reduce dehumidification and humidity in rooms.

Be it insufficient thermal insulation, leaking roofs or window surrounds. Even the smallest cracks in masonry or concrete can lead to mould. As soon as moisture accumulates in places where natural drying is no longer possible and permanently damp areas are present, mould can develop. Proper treatment must not only remove the mould, it must also ensure that the causes are treated.

This means that hairline cracks in the masonry must be removed, or that leaking roofs or window surrounds must be sealed, or that further measures must be taken. A pure mould control by chemical means reduces the effects of the mould only temporarily. In the long term, mould control is only successful by eliminating the causes in combination with mould treatment. Thus it makes little sense to fight mould planlessly and unknowingly with chemical bombs. In order to fight the causes an investigation by experts is necessary. Only so can be investigated, why the mold developed and how the causes can be fought lastingly.

Mould – no rare problem

A study shows that you are not alone with your mould infestation. In Germany, it is estimated that every fifth apartment is affected by moisture damage, with moisture damage in combination with mold infestation occurring in every tenth apartment. The obvious damages like dark stains on the wall are not the real problem.

We can not have been enough before the dangers of mold infestation. Therefore, the removal of dark stains should be your top priority. After all, the varying types of mould can cause serious damage to health. But mould does not always have to be visible. Even if there are no stains on the walls, mould can still be present. Then one becomes usually attentive by an unpleasant smell in the dwelling to the mold. Further signs for mold are for example silverfish or dust lice.

Removal of mould with professional tools

If you want to fight mould with professional tools, then you should not save on the wrong end. A chemical bomb is not enough to eliminate mould permanently and effectively. Damp walls and floors should be dried with a dry vacuum cleaner to prevent further mould growth.

In addition, you should clean the mold air with toxic spores with an air purifier. For this there is a liquid, which is used in connection with a cold fogger, in order to kill the poisonous spores. The liquid is called a spore destroyer.

Mould Remover

For the removal of mould itself, you will find a wide range of mould removers that remove mould infestation and inhibit new growth. The products to remove mould can be purchased in doses depending on the extent of the infestation. You should also consider the protective equipment.

Dust and spores can cause harmful damage through inhalation, which you can counteract with the right protective equipment. With gloves, disposable dust mask, breathing apparatus and disposable protective suit, you play it safe and protect yourself and your health by eliminating them.

If mould infestation is caused by water damage, an air dehumidifier is very helpful for temporary use. However, an air dehumidifier does not prevent new mould growth and should therefore not be used continuously, as it only eliminates damage that has occurred but does not solve the cause.

Do not act negligently

For a professional and sustainable mould removal it is important to know the causes, methods and procedures. Do not approach mould control naively or recklessly. Bring in experts who have both the appropriate protective equipment and the appropriate tools and knowledge.

Mould removal should not be taken lightly and should not only be combated with a chemical substance. In order to achieve long-term success, plan and knowledge must be used.

Visit https://www.shuttercraft.co.uk/ for more info

Share